picoWebcam

iMage - Driverless CCD Webcam for Mac OS X and for Windows XP/Vista

Model #: PIKCU03W2G

Product Description

• Based on Pico Instruments' proprietary PICOVideo^TM technology.
• Truly Plug & Play, no device driver is required prior to use, just like USB Flash thumb drive.
• Natively works with Mac OSX v10.4.3 or later with PowerPC or Intel core processor.
• Works with Mac OSX pre-v10.4.3 via macam driver.
• Natively works with Windows XP SP2 or later.
• Natively works with Windows Vista.
• High-speed USB 2.0 connection, faster than FireWire400.
• CCD camera sensor delivering better image quality at VGA image size and 15 fps frame rate.
• Seamlessly works with iChat*.

System Requirements

• For Macintosh computers:
   - Requires Mac OS X v10.4.3 or later.
   - 600MHz PowerPC G3 processor, or
   - 1.5GHz Intel Core processor.
   - Minimum 128MB RAM.
   - One USB 2.0 high-speed port.

• For PC computers:
   - Windows XP with SP2 or later / Vista.
   - Pentium P4 1.25G.
   - Minimum 128MB RAM..
   - One USB 2.0 high-speed port.

Product Specification

• 640 x 480 (VGA) 1/7-Inch color CCD sensor.
• Image size: 640 x 480 (VGA), 352 x 288 (CIF) and 320 x 240 (QVGA).
• 15 frames per second ¡¤ USB 2.0 high-speed connection (480 Mbits/s).
• UVC 1.1 compliance.
• Auto white balance control.
• Auto electronic iris control.
• 52⁰ horizontal view angle and 40⁰ vertical view angle.
• Built-in 512KB read-only USB thumb drive for storing User's Manual, FAQ and etc.
• Dimension: 2"(L) x 1 3/4"(H) x 1"(W) or 50mm (L) x 44mm (H) x 25mm (W).


		Camera lens with glass protection cover.
		Swivels allowing the camera to rotate.
		Webcam stand.
		1.5ft USB high speed cable.
		Threaded hole for tripod mounting.
		Wall mounting screw holes.
		Anti-skid magnetic pad.

Product Status

• PP (Pilot Run): June, '06
• MP (Mass Production): July, '06

* A third-party plug-in, iMagePlugin from http://www.ecamm.com/, is required when working with iChat.